Deck Demolition 

Deck demolition
It is the process of tearing down a deck. While removing the boards is the most challenging part, it is not the most difficult. It is essential to have the proper tools and safety equipment, including heavy gloves and safety goggles. Our professional company like Dump my Junk, can take care of these needs at an affordable cost.
If you're doing the work yourself, you'll need a dumpster or a jackhammer. A jackhammer, a level, and a large enough wheelbarrow will allow you to do the job quickly. A crowbar and a large shovel will help you get the job done right. If you have to hire a professional, you'll also need the necessary tools and equipment for safe removal.
If you're deconstructing a deck, it's essential to remove all wood before starting the process. You may also have to remove posts, which are vertical pieces of structural lumber. These posts can be 4x4s, 6x6s, or metal. To make the process go smoothly, you'll need to prepare yourself for the debris. Our team of skilled labor and planned management looks into the whole demolition process for you in a hassle-free manner.

There are a few simple ways to dispose of old decking. The easiest way is to stack up the boards on the curb and post a "free wood" sign. If you can't haul the wooden boards yourself, you can hire us for the purpose at an affordable fee.
Firstly, you should remove old screws and nails. Using a pry bar, lift the deck and unscrew each board. Then, use the pry bar to pull the large boards out. You can chop them up and store them for later disposal if they are significant. Otherwise, you can dump them in a nearby dumpster. Remember to follow all local recycling guidelines. It is possible to recycle pressure-treated wood, but following these guidelines is best to ensure safety.
Before removing old decking, remember to inspect each board for sharp nails. If you're looking for extra income, you can sell the wood for a profit. Alternatively, you can take apart the old material and sell it on eBay or Facebook. Deck demolition

When removing deck boards, we use a pry bar. This tool will prevent the board from splitting when working underneath it. It will also help to use speed square as a guide. If the nails are deeply sunk, we use a cat's paw to get them out. Once we've cut out the old boards, the joists can be removed.
If your deck has handrails, we take them out as well. Screws should be removed from these too. To remove balusters, work back and forth while loosening them with hands. If you've removed the handrail, you can use an oscillating multi-tool to cut the screws flush with the wood. Afterward, the bottom rail and handrails are removed.
Next, you need to dismantle the board. If you're using screws, cut them down to reduce the number of fasteners. This will help you get the board out easier. We use locking pliers to disengage the screw from the joists. This can be tricky when the screw has stripped or is completely stuck. Then we can easily pry the screws out with a hammer.
deck removal service

Depending on the type of screw, removing deck boards that are screwed into place can be tricky. Some of these screws can be loosened just by applying the right bit. Others need a little preparation before you can remove them. First, you should clean the heads of the screws if they are painted. Using a metal pick, remove the stain. This paint can block the bit from engaging.
If you do not want to use a screwdriver, you can try using a rotary tool to grind away the heads of the screws. This is more precise, but it is not necessary. You will want to avoid damaging the rest of your deck while using this method since it can lead to damage to your deck.
When removing screwed-down deck boards, it's essential to wear safety gear, including gloves and goggles. A hammer and a plug cutter are two standard tools you can use to remove stubborn screws. When using a pry bar, make sure that it's next to a nearby side of the board. Pull up the board until it's entirely off the deck. Don't force the board off if it's not entirely stripped or broken.
deck Demolition service

If you take good care of your deck, it should last more than twenty years. The life expectancy of your deck depends on several factors, such as the type of wood used and how well it is maintained. Cedar is an excellent choice for a deck because it is less likely to retain moisture and rot than other woods.
Wooden decks are notoriously short-lived because they have inadequate ventilation and are exposed to moisture from the soil beneath. Because humidity rises from the ground, the wood doesn't get adequate ventilation and will eventually rot. Additionally, if the deck is located near the ground, the lifespan will be reduced by half. The same thing applies to a deck that is close to the ground. In such cases, the joists of the deck will begin to rot as quickly as the boards.

To get an idea of how much it costs to demolish a deck, you can check the price on our online spreadsheet. The costs listed are for a large-sized deck and can vary significantly. The cost to tear down a deck is usually based on its square footage. If you'd like to save money, you can donate the lumber or salvage it for use as firewood. At Dump my Junk, we try to salvage lumber from a deck, making this project very eco-friendly. Typically, you don't need permits for a ground-floor deck. However, if the deck has a roof attached, you'll need to get a license for it. Our agency is well equipped with the appropriate tools and equipment for these processes and takes care of any hazardous materials evolved in the method. We are well known in these areas of St Petersburg, FL, Brandon, FL, for offering enormous discounts on cash payments. We do welcome any other route of payment as preferred by our clients. deck demolition and removal